Enterprise Recon 2.3

Install the Master Server

To install the Master Server:

Download the Installer

The installer is a bootable ISO image that installs the Master Server on your machine.

  1. Log into the Ground Labs Services Portal.
  2. From the Home tab, go to the Enterprise Recon 2.3 section and click Download to download the Enterprise Master Package Appliance ISO file.

Run the Installer

  1. On your machine, load the ER2 installation media.
  2. (Optional) To run a memory test, select Troubleshooting and press Enter.
  3. Select Install Enterprise Recon 2.3.xx and press Enter.
  4. In the Installation Configuration page, configure the following settings:
    Settings Description
    DATE & TIME Set the date, time format and time zone for the Master Server.
    KEYBOARD Select the keyboard layouts to use.
    LANGUAGE SUPPORT Select languages to install.
    LUKS DISK ENCRYPTION ER2 encrypts the disk that the Master Server is installed on. This passphrase decrypts the disk every time you start up the Master Server.
    1. Configure your network interfaces. Locally accessible interfaces are automatically detected and listed in the left panel of the installation window.
      Set the toggle button to ON to activate a network interface and click Configure to manually configure the network interface settings.
      You can re-configure the Master Server's network interface after the installation.
    2. Set the host name for your Master Server and click Apply.
  5. Once you have finished configuring the Master Server, click Begin Installation.
  6. After the system reboots to complete the installation, enter your passphrase to access the Master Server.

Activate ER2

Once the Master Server has started, log into the Web Console to activate ER2 and Install Node Agents.